Hardware
| Interface | 8 10/100M POE ports (Data /Power)
 2 10/100M RJ45 ports (Data)  | 
| LED | PWR: Lighting – The device is powered on normally
 AI: Lighting – The intelligent mode is enabled Port: Lighting – Port link is normal Blinking – Data in transit  | 
| MAC Address Table Size | 2K | 
| Jumbo Frame | 2048 byte | 
| Store & Forwarding | Yes | 
| Mode | Normal Mode
 Extend+Watch Dog Mode  | 
| Cabling type
 
  | 
100Base-TX: Cat 5e or better UTP/STP(≤100m)
 10Base-TX: Cat 5e or better UTP/STP(≤250m)  | 
| Power Input POE Standards | Single port maximum power 30W
 Whole switch maximum power 120W Supporting over-current, over-voltage and short-circuit protection Supporting Soft Start of High Power PD Support sequential boot-up Power Supply Pin:12+/36- AC 100~240V 50-60Hz  | 
Software
| Data Transfer Rate | 10Mbps(Half-duplex and Full-duplex)
 100Mbps(Half-duplex and Full-duplex)  | 
| Basic function
 
  | 
Follow IEEE 802.3 Ethernet and IEEE802.3u Fast Ethernet Protocol
 Supports POE IEEE 802. 3af/at compliant Powered Device (PD) Store-and-forward switching scheme Support IEEE802.3X full duplex and Backpressure half duplex MAC address auto-learning & auto-aging  | 
| Standards
 
  | 
IEEE 802.3 10BASE-T Ethernet
 IEEE 802.3i 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3af/at, Power over Ethernet IEEE 802.3x Flow Control  | 
| Switching Capacity | 2G | 
Others
| Environment | Operation Temperature:0℃~40℃
 Storage Temperature:-40℃~70℃ Operation Humidity:10%~90% RH Non-condensing Storage Humidity:5%~90% RH Non-condensing  | 
| Dimensions | 190*140*43mm(L * W * H ) | 




				
