Hardware
| Interface | 8 10/100M POE ports (Data /Power)
 2 10/100/1000M uplink RJ45 ports (Data) 1 1000M uplink SFP slot port (Data)  | 
| LED | PWR: Lighting – The device is powered on normally
 AI: Lighting – The intelligent mode is enabled Port: Lighting – Port link is normal Blinking – Data in transit  | 
| Mode | Normal Mode
 Extend+Watch Dog Mode  | 
| Store & Forwarding | Yes | 
| MAC Address Table Size | 8K | 
| Jumbo Frame | 2048 byte | 
| Switching Capacity | 7.6G | 
| Power Input POE Standards | Single port maximum power 30W
 Whole switch maximum power 120W Support over-current, over-voltage and short-circuit protection Support Soft Start of High Power PD Support sequential boot-up Power Supply Pin:12+/36- AC 100~240V 50-60HZ  | 
Software
| Basic function | Follow IEEE 802.3 Ethernet and IEEE802.3u Fast Ethernet Protocol
 Support POE IEEE 802. 3af/at compliant Powered Device (PD) Store-and-forward switching scheme Support IEEE802.3X full duplex and Backpressure half duplex MAC address auto-learning & auto-aging Support AI+extend, intelligent troubleshooting, ultra-long cable extension  | 
| Cabling type | 1000BASE-T : Cat5e or better UTP(≤100m)
 100Base-TX: Cat 5e or better UTP/STP(≤100m) 10Base-TX: Cat 5e or better UTP/STP(≤250m)  | 
| Standards | IEEE 802.3 10BASE-T Ethernet
 IEEE 802.3i 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet IEEE 802.3af/at, Power over Ethernet IEEE 802.3x Flow Control  | 
| Data Transfer Rate | 10Mbps(Half-duplex and Full-duplex)
 100Mbps(Half-duplex and Full-duplex) 1000Mbps(Full-duplex)  | 
Others
| Environment | Operation Temperature:0℃~40℃
 Storage Temperature:-40℃~70℃ Operation Humidity:10%~90% RH Non-condensing Storage Humidity:5%~90% RH Non-condensing  | 
| Dimensions | 190*140*43mm(L*W*H) | 





				

